{"title":"Land Clearing \u0026 Forestry","description":"\u003cp\u003e\u003cstrong\u003eClearing is where the wrong attachment costs the most\u003c\/strong\u003e — either you buy a mulcher your machine cannot turn, or you buy a brush cutter and find out it stalls in anything over 3 inches.\u003c\/p\u003e\u003cp\u003eHere is the honest split: \u003cstrong\u003eunder 3in material, a brush cutter is the right tool and far cheaper.\u003c\/strong\u003e Over that you need a mulcher, and a mulcher needs 30–45 GPM that most machines simply do not have.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMulching contractors bill $2,500–4,500 a day.\u003c\/strong\u003e If you are billing days, the maths works. If you are clearing your own land twice a year, \u003cstrong\u003erenting is the honest answer and we will tell you so before you spend the money.\u003c\/strong\u003e\u003c\/p\u003e","products":[{"product_id":"72in-skid-steer-root-grapple-12-25-gpm","title":"72\" Skid Steer Root Grapple (12–25 GPM)","description":"\u003ch2\u003eWill This Fit Your Machine?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eYou need 12 to 25 GPM of auxiliary hydraulic flow, plus a Universal Skid Steer (SSL) plate.\u003c\/strong\u003e GPM means gallons per minute — how much hydraulic fluid your machine can push. Most standard-flow machines handle this without trouble.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo case drain needed.\u003c\/strong\u003e A case drain is an extra oil line some spinning motors need. This grapple opens and closes using cylinders, not a motor, so there is nothing that needs one.\u003c\/p\u003e\n\u003ch3\u003eCheck your machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBobcat T740\u003c\/strong\u003e — makes 23 GPM standard. \u003cstrong\u003eFits.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKubota SVL75-3\u003c\/strong\u003e — standard flow. \u003cstrong\u003eFits.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCAT 259D3\u003c\/strong\u003e — standard flow. \u003cstrong\u003eFits.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOn a high-flow machine?\u003c\/strong\u003e Extra flow just closes the jaws faster — it will not damage a cylinder the way too much flow damages a motor. Run it in standard mode if you want finer control.\u003c\/p\u003e\n\u003ch3\u003eChecking Your Flow, And What Too Little Feels Like\u003c\/h3\u003e\n\u003cp\u003eFind your machine's GPM on a decal near the auxiliary couplers on the lift arm, or in the operator's manual. \u003cstrong\u003eUnder 12 GPM, the jaws close slowly and the grip is weak\u003c\/strong\u003e — enough to lose a log mid-lift on a slope, not just work slower.\u003c\/p\u003e\n\u003cp\u003eOne more thing worth checking: jaw opening is usually a bit less than the grapple's overall frame width. If what you clear regularly runs close to 72 in across, ask us for the actual jaw-open measurement before you order.\u003c\/p\u003e\n\u003ch3\u003eSize it to your machine, not to the job\u003c\/h3\u003e\n\u003cp\u003eThis grapple weighs \u003cstrong\u003eabout 1,100 lb\u003c\/strong\u003e. That weight comes off your lifting capacity before you grab anything:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBobcat T740\u003c\/strong\u003e — 3,200 lb ROC (rated operating capacity, the safe weight limit) minus 1,100 lb grapple = \u003cstrong\u003e2,100 lb of material you can actually carry.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKubota SVL75-3\u003c\/strong\u003e — 2,490 lb ROC minus 1,100 lb grapple = \u003cstrong\u003e1,390 lb of material.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eA grapple too wide for your machine is worse than one too small.\u003c\/strong\u003e It hangs further out in front, which shifts your machine's balance point and costs you more lifting capacity than the extra weight alone would suggest.\u003c\/p\u003e\n\u003ch3\u003eDo not buy this one if\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou mostly move pallets or straight material.\u003c\/strong\u003e Forks are cheaper and faster for that.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour machine's ROC is under 2,000 lb.\u003c\/strong\u003e You would lift the grapple and very little else.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want to sift soil out of debris.\u003c\/strong\u003e A root grapple grabs and holds. A skeleton bucket (one with gaps) screens soil out. Different jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWorking width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e72 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRequired flow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12–25 GPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCase drain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot required — cylinder driven\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~1,100 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMount\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUniversal Skid Steer (SSL) quick-attach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTotal cost, before you check out\u003c\/h3\u003e\n\u003cp\u003eShipping is free, built into the price above. At about 1,100 lb, this stays under the 1,500 lb liftgate limit — \u003cstrong\u003eliftgate delivery is available.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTell us your make, model, and what you are clearing. We will size it properly.\u003c\/em\u003e\u003c\/p\u003e","brand":"Right Fit Attachments","offers":[{"title":"66 in","offer_id":50056044216534,"sku":"RFA-GR-66","price":3920.0,"currency_code":"USD","in_stock":true},{"title":"72 in","offer_id":50056044249302,"sku":"RFA-GR-72","price":4320.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/8937\/4934\/files\/pexels-photo-8808933.jpg?v=1786341770"},{"product_id":"skid-steer-stump-grinder-18-35-gpm","title":"Skid Steer Stump Grinder (18–35 GPM, Case Drain)","description":"\u003ch2\u003eWill this fit your machine?\u003c\/h2\u003e\n\u003cp\u003eYou need \u003cstrong\u003e18 to 35 GPM\u003c\/strong\u003e and a \u003cstrong\u003ecase drain line\u003c\/strong\u003e. GPM means gallons per minute — how much hydraulic fluid your machine can push out. A case drain is an extra hydraulic line that sends leaked fluid straight back to the tank. Stump grinders get mismatched to machines more than anything else we sell. This range crosses both standard flow and high flow, and the brochure words alone won't tell you which side you're on.\u003c\/p\u003e\n\n\u003ch3\u003eThe trap that costs people a motor\u003c\/h3\u003e\n\u003cp\u003eOne manufacturer sells two different stump grinders and labels \u003cstrong\u003eboth\u003c\/strong\u003e of them \"High Flow.\" One needs 26.9 GPM. The other needs 45 GPM. Same two words on the label, an 18 GPM difference underneath them.\u003c\/p\u003e\n\u003cp\u003eWe checked 15 machines. \"High flow\" meant anywhere from \u003cstrong\u003e26.9 to 45 GPM\u003c\/strong\u003e, across six different labeling systems. That's why we always quote you a number, not a category name.\u003c\/p\u003e\n\n\u003ch3\u003eCheck your machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBobcat T740:\u003c\/strong\u003e 23 GPM standard flow — yes. 30.5 GPM high flow — yes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBobcat T770, high flow (36.6 GPM):\u003c\/strong\u003e Careful — that's 1.6 GPM over our 35 GPM ceiling. Run it in standard-flow mode, or email us and we'll quote you the high-flow model instead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKubota SVL75-3, standard flow (19.2 GPM):\u003c\/strong\u003e Yes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCAT 259D3, standard flow (20.0 GPM):\u003c\/strong\u003e Yes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eHow to check for a case drain port\u003c\/h3\u003e\n\u003cp\u003eLook at the hydraulic couplers on your loader arm. The two main lines — the ones with flat-faced fittings — are your supply and return. A case drain is a third, smaller line that runs straight back to the tank instead of through those two. If you only see two ports, you don't have one. It has to come from the machine's hydraulics; you can't bolt one on afterward.\u003c\/p\u003e\n\n\u003ch3\u003eCase drain is mandatory here\u003c\/h3\u003e\n\u003cp\u003eThis grinder runs a \u003cstrong\u003episton motor\u003c\/strong\u003e, and a piston motor must have a case drain line — it is not optional. Whether an attachment needs a case drain depends on the type of motor inside it, not on what kind of attachment it is. Run a piston motor with no case drain and trapped pressure destroys the seals, usually within a season. \u003cstrong\u003eIf your machine has no case drain port, tell us before you order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe same logic runs the other way on flow, too. Spinning a piston motor faster than it's rated for doesn't grind stumps any quicker — it just builds heat and wears out bearings and seals well before their time. That's why the T770 above gets run in standard-flow mode instead of full high-flow.\u003c\/p\u003e\n\n\u003ch3\u003eDon't buy this one if\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou've got one stump to grind.\u003c\/strong\u003e Rent one instead. This attachment pays for itself over dozens of stumps, not one afternoon.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour machine's flow is under 18 GPM.\u003c\/strong\u003e It will still turn, but slowly, and you'll cook the motor doing it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou're grinding in rocky ground.\u003c\/strong\u003e The teeth wear out and need replacing, and rock wears them three times faster. Budget for spare teeth from day one.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen the teeth wear out\u003c\/h3\u003e\n\u003cp\u003eWe sell replacement carbide teeth separately, sized to fit this grinder. If you're working rocky ground, order a spare set with your first purchase — losing a day to a parts order costs more than the teeth do.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRequired flow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18–35 GPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCase drain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eRequired\u003c\/strong\u003e — piston motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~1,000 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMount\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUniversal Skid Steer (SSL) quick-attach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTeeth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCarbide, replaceable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTotal cost, before you check out\u003c\/h3\u003e\n\u003cp\u003eShipping is free, built into the price above. This unit weighs under 1,500 lb, so \u003cstrong\u003eliftgate delivery is available\u003c\/strong\u003e. A liftgate lowers your delivery to the ground, so you won't need a forklift.\u003c\/p\u003e\n\n\u003cp\u003eSend us your machine's make, model, and flow number. We'll confirm it fits before you spend anything.\u003c\/p\u003e","brand":"Right Fit Attachments","offers":[{"title":"Standard","offer_id":50056044511446,"sku":"RFA-SG-STD","price":6420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/8937\/4934\/files\/pexels-photo-7763704.jpg?v=1786341770"},{"product_id":"skid-steer-forestry-mulcher-30-45-gpm","title":"Skid Steer Forestry Mulcher (30–45 GPM, High Flow Only)","description":"\u003ch2\u003eWill this fit your machine?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProbably not — and we'd rather tell you that now than after you've spent the money.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYou need \u003cstrong\u003e30 to 45 GPM\u003c\/strong\u003e and a \u003cstrong\u003ecase drain line\u003c\/strong\u003e. GPM means gallons per minute — how much hydraulic fluid your machine can push out. A case drain is an extra hydraulic line that sends leaked fluid straight back to the tank instead of through the normal return line. This flow number rules out most machines with standard flow. This is the most demanding attachment we sell.\u003c\/p\u003e\n\n\u003ch3\u003eCheck your machine, honestly\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBobcat T740, standard flow (23 GPM):\u003c\/strong\u003e No. Not close.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBobcat T740, high flow (30.5 GPM):\u003c\/strong\u003e Careful — that's the very bottom of the range. It will cut, but slowly, and it will run hot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBobcat T770, high flow (36.6 GPM):\u003c\/strong\u003e Yes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKubota SVL75-3, standard flow:\u003c\/strong\u003e No.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBobcat T870, high flow (36.6 GPM):\u003c\/strong\u003e Yes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCAT 299D2 XHP, high flow (40 GPM):\u003c\/strong\u003e Yes — this machine has room to spare here.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLook at the actual number on your machine's plate, not the words in the brochure.\u003c\/strong\u003e The term \"high flow\" alone can mean anywhere from 26.9 to 45 GPM, depending on the maker. Those words won't tell you if you're at 27 or 45. On this attachment, that gap is the whole decision.\u003c\/p\u003e\n\u003cp\u003eRunning under 30 GPM doesn't just mean \"slower.\" The cutting disc never reaches real cutting speed, so it rubs and grinds instead of chopping cleanly. Your hydraulic pump works flat out the whole time even though the disc isn't spinning fast enough — that effort shows up as heat in the oil, not as cut material on the ground.\u003c\/p\u003e\n\n\u003ch3\u003eThe money question, since this is the expensive one\u003c\/h3\u003e\n\u003cp\u003eMulching contractors charge \u003cstrong\u003e$2,500 to $4,500 a day\u003c\/strong\u003e for this work. That's why this attachment costs what it does. If you're only clearing your own land a few times a year, renting is the honest answer, and we'll tell you that before you spend the money.\u003c\/p\u003e\n\u003cp\u003eIf you're billing for full days of work, this pays for itself fast. It also qualifies for Section 179, a tax rule that lets you deduct the full purchase price in the same year you start using it.\u003c\/p\u003e\n\n\u003ch3\u003eHow to check for a case drain port\u003c\/h3\u003e\n\u003cp\u003eLook at the coupler block on your loader arm. The two big lines — the ones with flat-faced fittings — are your supply and return. Those run the mulcher itself. A case drain is a \u003cstrong\u003ethird line\u003c\/strong\u003e, smaller than the other two, that runs straight back to the tank instead of through the valve. If your machine only has two ports there, you don't have a case drain. It's not something you can add with a fitting — it has to be plumbed from the machine's hydraulic system.\u003c\/p\u003e\n\n\u003ch3\u003eCase drain is not optional\u003c\/h3\u003e\n\u003cp\u003eThis attachment runs a \u003cstrong\u003episton motor\u003c\/strong\u003e, and a piston motor must have a case drain line. Run one without it and trapped pressure destroys the seals. That failure usually gets blamed on the operator, not the missing hookup. \u003cstrong\u003eIf your machine has no case drain port, do not order this.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eDon't buy this one if\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou're under 30 GPM.\u003c\/strong\u003e There's no workaround and no adapter for that. Your machine's flow is the hard limit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou only clear land a few days a year.\u003c\/strong\u003e Rent instead. The cost only makes sense with regular use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want to move what you cut.\u003c\/strong\u003e A mulcher chews material up and leaves it in place. You'll also need a grapple to move it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRequired flow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30–45 GPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCase drain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eRequired\u003c\/strong\u003e — piston motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~2,000 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMount\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUniversal Skid Steer (SSL) quick-attach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eTotal cost, before you check out\u003c\/h3\u003e\n\u003cp\u003eShipping is free, built into the price above. This unit weighs over 1,500 lb, so \u003cstrong\u003eliftgate delivery is not available\u003c\/strong\u003e. You'll need a loading dock, a forklift, or a second machine ready to take it off the truck. Sort that out before it shows up.\u003c\/p\u003e\n\n\u003cp\u003eThis is the one to check before you commit. Send us your machine's actual GPM number and what you're clearing.\u003c\/p\u003e","brand":"Right Fit Attachments","offers":[{"title":"Standard Duty","offer_id":50056044708054,"sku":"RFA-FM-STD","price":19645.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/8937\/4934\/files\/free-photo-of-bulldozer-in-autumn-forest-clearing-harbor-springs.jpg?v=1786341788"},{"product_id":"72in-skid-steer-brush-cutter-17-30-gpm","title":"72\" Skid Steer Brush Cutter (17–30 GPM)","description":"\u003ch2\u003eWill This Fit Your Machine?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eYou need 17 to 30 GPM.\u003c\/strong\u003e GPM means gallons per minute — how much hydraulic fluid your machine can push. This is the standard-flow version, on purpose: most machines run standard flow, but most brush cutter listings quietly assume you have the stronger \"high flow\" kind.\u003c\/p\u003e\n\u003ch3\u003eCheck your machine\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBobcat T740\u003c\/strong\u003e — makes 23 GPM standard. \u003cstrong\u003eYes, it fits.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKubota SVL75-3\u003c\/strong\u003e — makes 19.2 GPM standard. \u003cstrong\u003eYes, it fits.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCAT 259D3\u003c\/strong\u003e — makes 20.0 GPM standard. \u003cstrong\u003eYes, it fits.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBobcat T740 on high flow\u003c\/strong\u003e — makes 30.5 GPM. \u003cstrong\u003eThat is above this cutter's range.\u003c\/strong\u003e See below.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eToo much flow is also a failure\u003c\/h3\u003e\n\u003cp\u003eMost sites warn you about not having enough flow. \u003cstrong\u003eAlmost nobody warns you about having too much.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf your machine pushes more than 30 GPM, you will overspeed this motor, heat up the oil, and wear the motor out early — and it will not fail loudly enough for you to catch it in time. \u003cstrong\u003eIf your machine is set to high flow, switch it to standard-flow mode, or tell us and we will quote you the high-flow model instead.\u003c\/strong\u003e Same cutter deck, different motor inside.\u003c\/p\u003e\n\u003ch3\u003eTelling Standard From High Flow In The Cab\u003c\/h3\u003e\n\u003cp\u003eMost machines with a high-flow option have a switch or button in the cab — often on the joystick or a side panel — labeled \"high flow,\" plus a decal near the auxiliary couplers. High-flow machines also tend to run bigger couplers (often 3\/4 in versus 1\/2 in for standard flow) and usually add a third, smaller coupler for a case drain line. No switch and no extra coupler generally means standard flow only.\u003c\/p\u003e\n\u003ch3\u003eCase drain\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNot required on this one.\u003c\/strong\u003e A case drain is an extra hydraulic line some motors need to send leftover oil back safely. This cutter uses a gear motor, which sends oil back through the normal lines, so it does not need one. (The high-flow version of this cutter uses a different kind of motor, called a piston motor, and \u003cstrong\u003ethat one does need a case drain\u003c\/strong\u003e — same idea, different attachment.)\u003c\/p\u003e\n\u003ch3\u003eWhat it will actually cut\u003c\/h3\u003e\n\u003cp\u003eGrass, brush, and small trees up to about \u003cstrong\u003e3 inches thick\u003c\/strong\u003e. Anything bigger than that needs a mulcher instead — see that product page for the honest version of that conversation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThree inches is about the width of a baseball.\u003c\/strong\u003e Hold one up next to a branch if you are not sure — anything noticeably thicker than that belongs to a mulcher, not this cutter.\u003c\/p\u003e\n\u003ch3\u003eDo not buy this one if\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou are clearing trees 4 inches thick or more.\u003c\/strong\u003e You will bog the machine down and blame the cutter. Get a mulcher, or rent one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour machine makes less than 17 GPM.\u003c\/strong\u003e It will turn weakly and stall in anything real.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a finished lawn look.\u003c\/strong\u003e This cuts rough. It leaves a cleared field, not a mowed yard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCutting width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e72 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRequired flow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e17–30 GPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCase drain\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot required — gear motor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCutting capacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUp to ~3 in material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~1,100 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMount\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUniversal Skid Steer (SSL) quick-attach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTotal cost, before you check out\u003c\/h3\u003e\n\u003cp\u003eShipping is free, built into the price above — no \"call for shipping.\" This is under 1,500 lb, so \u003cstrong\u003eliftgate delivery is available\u003c\/strong\u003e if you have no way to get it off the truck.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNot sure if your machine is standard or high flow? Send us your make and model and we will read the spec sheet for you.\u003c\/em\u003e\u003c\/p\u003e","brand":"Right Fit Attachments","offers":[{"title":"72in Standard Flow","offer_id":50056045166806,"sku":"RFA-BC-72-STD","price":5920.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/8937\/4934\/files\/free-photo-of-skid-steer-loader-on-seaside-street.jpg?v=1786341788"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/8937\/4934\/collections\/free-photo-of-bulldozer-in-autumn-forest-clearing-harbor-springs.jpg?v=1786346161","url":"https:\/\/rightfitattachments.com\/collections\/land-clearing.oembed","provider":"Rightfit Attachments","version":"1.0","type":"link"}