{"product_id":"10ft-skid-steer-snow-pusher","title":"10' Skid Steer Snow Pusher — Size It to Your Loader","description":"\u003ch2\u003eWill This Fit Your Machine?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eYes, on almost any machine.\u003c\/strong\u003e This pusher bolts on to any Universal Skid Steer (SSL) plate. It needs no hydraulics, no flow, and no case drain (an extra oil line some motors need — this has no motor).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe real question is not whether it mounts. It is whether your machine should be pushing something this wide.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eRead this before you size up — it is a safety issue\u003c\/h3\u003e\n\u003cp\u003eA pusher that is too wide for your loader \u003cstrong\u003ecan tip the machine forward\u003c\/strong\u003e when it is full of wet snow. The weight hangs out in front of your machine's axle. Push hard at speed and the back end can lift off the ground. \u003cstrong\u003eThis is the most common way people get hurt with snow attachments\u003c\/strong\u003e, and almost nobody selling them warns you about it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWider is not automatically better. Wider is only faster if your machine can hold it down.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eMatch the width to your loader\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder 2,000 lb ROC\u003c\/strong\u003e (ROC = rated operating capacity, the safe weight limit your machine can lift) — 8 ft is the biggest you should run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2,000–2,700 lb ROC\u003c\/strong\u003e (like a Kubota SVL75-3 or CAT 259D3) — 8 to 10 ft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2,700–3,500 lb ROC\u003c\/strong\u003e (like a Bobcat T740) — 10 to 12 ft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe pusher itself weighs \u003cstrong\u003eabout 800 lb\u003c\/strong\u003e (10 ft size). That weight comes off your machine's capacity before you even pick up snow.\u003c\/p\u003e\n\u003ch3\u003eFinding Your Machine's ROC Without Guessing\u003c\/h3\u003e\n\u003cp\u003eROC is printed on your machine — usually on a rating plate near the operator's seat — or in the spec sheet that came with it. Look it up before you pick a width off the list above, rather than guessing from the machine's size.\u003c\/p\u003e\n\u003ch3\u003eWhen to actually buy this\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eOrder in July or August, not November.\u003c\/strong\u003e Wait for the first snow forecast and you are competing with everyone else for the same trucks and the same stock. \u003cstrong\u003eWinter season runs November through March. Shipping takes about two weeks. Order by October 1st and you will be ready.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you buy it this year, there is a tax rule called Section 179 that lets you deduct the full price in the same year you start using it — worth asking your accountant about before December 31st.\u003c\/p\u003e\n\u003ch3\u003eDo not buy this one if\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou need to stack snow up high.\u003c\/strong\u003e A pusher only pushes. A snow plow angles snow to the side, and a bucket stacks it. These are different tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou are clearing gravel.\u003c\/strong\u003e A steel edge will tear up your gravel driveway. You want a rubber or poly (plastic) edge instead.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 \/ 10 \/ 12 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e~800 lb (10 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHydraulics required\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMount\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUniversal Skid Steer (SSL) quick-attach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMoving It Between Sites\u003c\/h3\u003e\n\u003cp\u003eUnlike an angled plow, this pusher's box does not narrow for the road. Federal rules cap trailer width at 102 in (8 ft 6 in) without an oversize permit — the 10 ft (120 in) and 12 ft (144 in) sizes are both wider than that straight across. If you plan to trailer this between lots yourself, check your trailer's actual width first, or plan on leaving it on site.\u003c\/p\u003e\n\u003cp\u003eAlso measure your narrowest gate or garage opening before you order. The moldboard and wing edges sit slightly outside the pusher's rated width — a 10 ft pusher needs a little more than 10 ft of clearance to pass through.\u003c\/p\u003e\n\u003ch3\u003eTotal cost, before you check out\u003c\/h3\u003e\n\u003cp\u003eShipping is free, built into the price above. This pusher is under 1,500 lb, so \u003cstrong\u003eliftgate delivery is available\u003c\/strong\u003e (a liftgate lowers the crate to the ground, no forklift needed).\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTell us your machine and the size of your lot. We will tell you the widest one you can safely run.\u003c\/em\u003e\u003c\/p\u003e","brand":"Right Fit Attachments","offers":[{"title":"8 ft","offer_id":50056044544214,"sku":"RFA-SP-08","price":3220.0,"currency_code":"USD","in_stock":true},{"title":"10 ft","offer_id":50056044576982,"sku":"RFA-SP-10","price":3720.0,"currency_code":"USD","in_stock":true},{"title":"12 ft","offer_id":50056044609750,"sku":"RFA-SP-12","price":4320.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/8937\/4934\/files\/free-photo-of-skid-steer-loader-clearing-snow-in-winter-sunlight.jpg?v=1786341770","url":"https:\/\/rightfitattachments.com\/products\/10ft-skid-steer-snow-pusher","provider":"Rightfit Attachments","version":"1.0","type":"link"}