Attachments for an ASV VT-100 or Yanmar TL100VS

ASV VT-100 and Yanmar TL100VS — 20.0 GPM standard, 40.0 GPM high flow. GPM means gallons of hydraulic oil per minute — what powers an attachment. These are the same platform sold under two badges, and on this one, high flow comes standard — you have it whether you paid extra for it or not.

Runs on standard flow (20.0 GPM)

• Pallet forks, rock bucket, snow pusher — no hydraulics needed.
• Root grapple, 12–25 GPM — yes.
• Auger drive, 10–25 GPM — yes. No case drain needed — it runs a gear motor, not a piston motor.
• Backhoe, concrete mixer, snow plough, 10–25 GPM — all yes.
• Trencher, 16–30 GPM — yes. Case drain required.
• Brush cutter, 17–30 GPM — yes.
• Stump grinder, 18–35 GPM — yes. Case drain required.

Needs high flow (40.0 GPM)

• Forestry mulcher, 30–45 GPM — yes.

High flow comes standard here — which is the trap

• On most machines, you pay extra for high flow. That means most operators know whether they have it.
• On this one, it's just there. That makes it easy to run an attachment on the wrong setting without meaning to.
• At 40 GPM, only the mulcher belongs on the high flow setting. Everything else on this list tops out at 25, 30, or 35 GPM.
• Check which setting is selected before you start work, not after something overheats.

How much weight it can lift

ASV's own published number for this machine is a rated operating capacity — the safe working load — of 3,500 lb, with a tipping load of 10,000 lb. Some dealer listings for the Yanmar-badged TL100VS show slightly different numbers. That happens when one machine gets sold under two brand names. Treat 3,500 lb as your working number, and confirm the exact figure on your build sheet.

Our rock bucket needs at least 2,000 lb of lift capacity. This machine clears that by 1,500 lb. No concern here.

How it hooks up to attachments

Both badges use the standard universal quick-attach plate — the same industry-standard mount used across most full-size machines from other brands. If an attachment fits a Bobcat, Case, or Deere, it fits this machine too.

Send us the model and we will check it properly

• Free, whether you buy from us or not.
• Six checks: mount, flow, too much flow, case drain, lift capacity, working dimension.
• support@rightfitattachments.com — replies in less than 24 hours.