Machine fitment guide
Attachments for a Case TV370B
Case TV370B — 24.2 GPM standard, 32.4 GPM high flow, 3,050 psi. GPM means gallons of hydraulic oil per minute — what powers an attachment. This machine has the smallest gap between its two settings of any machine on our site, so which one you pick matters less here than usual.
Runs on standard flow (24.2 GPM)
- Pallet forks, rock bucket, snow pusher — no hydraulics needed.
- Root grapple, 12–25 GPM — yes.
- Auger drive, 10–25 GPM — yes. No case drain needed — it runs a gear motor, not a piston motor.
- Backhoe, concrete mixer, snow plough, 10–25 GPM — all yes.
- Trencher, 16–30 GPM — yes. Case drain required.
- Brush cutter, 17–30 GPM — yes.
- Stump grinder, 18–35 GPM — yes. Case drain required.
Needs high flow (32.4 GPM)
- Forestry mulcher, 30–45 GPM — yes, with a little room to spare.
Watch for too much flow
- The trencher and brush cutter top out at 30 GPM. Your high flow is 32.4 GPM — over both. Run them on standard.
- The stump grinder tops out at 35 GPM, so either setting works fine for it.
Pressure: not a concern here
This machine runs at 3,050 psi — psi measures how hard the oil pushes, not how much of it flows. Most attachments are built for around 3,500 psi, so 3,050 sits comfortably under that. Not something to worry about on this machine.
How much weight it can lift
The TV370B's rated operating capacity — its safe working load — is 2,590 lb. Pushed to the higher 50% rating, it's 3,700 lb, and Case offers a counterweight option that raises that further, to 3,900 lb. Tipping load is 7,400 lb.
Our rock bucket needs at least 2,000 lb of lift capacity. The base TV370B clears that by 590 lb — a real, comfortable pass (though not the tightest margin on this page — the CAT 259D3 clears it by just 10 lb). If you're already loading this machine near its limit, the counterweight option is worth asking your dealer about.
How it hooks up to attachments
The TV370B uses the standard universal quick-attach plate — the same one used by Bobcat, Deere, Caterpillar, and most other brands. Case calls it a "Universal Quick Attach" system in its own literature. If an attachment fits one of those other brands, it fits this machine too.
Send us the model and we will check it properly
- Free, whether you buy from us or not.
- Six checks: mount, flow, too much flow, case drain, lift capacity, working dimension.
- support@rightfitattachments.com — replies in less than 24 hours.
Not sure it fits? Ask before you buy.
Send your make and model — we'll run all six fitment checks and tell you straight, including when the answer is don't buy it.